Removal Procedure
WARNING: This page is about a different car, the 2007 Pontiac G5 Pursuit, 2007 Pontiac G5, and 2007 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect the intake air temperature (IAT) sensor harness connector.
- Loosen the air cleaner assembly fresh air duct to resonator clamp.
- Remove the push-pin fastener from the air outlet resonator/duct assembly to support bracket.
- Loosen the resonator to throttle body clamp.
- Disconnect the air cleaner assembly fresh air duct from the resonator.
- Remove the air outlet resonator from the throttle body.