LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Cobalt LTZ >> Repair and Diagnosis >> External Pages >> Different car >> Section 678 (Manual Transmission Clutch System) >> Repair Instructions >> Clutch Pedal Position Switch Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 Pontiac G5 Pursuit, 2007 Pontiac G5, and 2007 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the clutch pedal assembly. Refer to Clutch Pedal Replacement .
  2. Disconnect the electrical connector (2) from the clutch pedal position (CPP) switch (1).
    3. Fig 1: View Of Clutch Pedal Position Switch
    GM889965Courtesy of GENERAL MOTORS CORP.
  3. Rotate the CPP switch (1) counterclockwise to release, and remove the switch from the clutch pedal assembly.


    Fig 1: Removing/Installing CPP Switch From/To Clutch Pedal
    GM1547861Courtesy of GENERAL MOTORS CORP.
  1. Disconnect the electrical connector (2) from the clutch pedal position (CPP) switch (1).
  2. Rotate the CPP switch (1) counterclockwise to release, and remove the switch from the clutch pedal assembly.
scientia non olet · About LEMON Manuals