Removal Procedure

WARNING: This page is about a different car, the 2007 Pontiac G5 Pursuit, 2007 Pontiac G5, and 2007 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Removing/Installing CPP Switch From/To Clutch Pedal

Courtesy of GENERAL MOTORS CORP.

Disconnect the electrical connector (2) from the clutch pedal position (CPP) switch (1).
Remove the CPP switch (1) from the clutch pedal by twisting the CPP switch (1) counterclockwise.