LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Cobalt LTZ >> Repair and Diagnosis >> External Pages >> Different car >> Section 677 (Engine Mechanical - 2.0L (LSJ)) >> Repair Instructions >> On-Vehicle Repair Instructions >> Engine Support Fixture >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2007 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Engine Support Fixture
    GM1386414Courtesy of GENERAL MOTORS CORP.
  1. Place the engine support fixture long bar (2), from the J 28467-B  across the engine compartment. See Special Tools .
  2. Install the engine support fixture legs (3) from the J 43405  on the engine support fixture long bar and center above the engine. See Special Tools .
  3. Install the engine support fixture hooks (4) and engine support fixture handle to the engine support cross bar.
  4. Place the engine support cross bar over the engine support long bar and connect the hooks to the engine lift brackets.
scientia non olet · About LEMON Manuals