LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Cobalt LTZ >> Repair and Diagnosis >> External Pages >> Different car >> Section 677 (Engine Mechanical - 2.0L (LSJ)) >> Repair Instructions >> On-Vehicle Repair Instructions >> Engine Oil Cooler Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.
  1. Drain the charged air cooling system. Refer to Draining and Filling Cooling System - Charge Air Cooling System .
    2. Fig 1: Identifying Oil Cooler
    GM1577505Courtesy of GENERAL MOTORS CORP.
  2. Remove the oil pressure sensor (1).
  3. Disconnect the oil cooler hoses (2).
  4. Remove the oil cooler stud (3) and the oil cooler bolts (4).
  5. Remove the oil cooler.
scientia non olet · About LEMON Manuals