LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Cobalt LTZ >> Repair and Diagnosis >> External Pages >> Different car >> Section 677 (Engine Mechanical - 2.0L (LSJ)) >> Repair Instructions >> On-Vehicle Repair Instructions >> Camshaft Cover Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View OF Ignition Coils
    GM1387190Courtesy of GENERAL MOTORS CORP.
  1. Remove the ignition coils. Refer to Ignition Coil Replacement .
  2. Remove the ground strap and stud.
  3. Disconnect the positive crankcase ventilation (PCV) hose from the cam cover.
  4. Fig 2: View Of Fuel Line
    GM1387192Courtesy of GENERAL MOTORS CORP.
  5. Disconnect the fuel feed pipe from the fuel rail.
  6. Fig 3: View Of Camshaft Cover
    GM1382305Courtesy of GENERAL MOTORS CORP.
  7. Remove the camshaft cover bolts.
  8. Remove the camshaft cover.