Oil Level Indicator and Tube Installation

WARNING: This page is about a different car, the 2007 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Oil Level Indicator Tube

Courtesy of GENERAL MOTORS CORP.

Lubricate the oil level indicator tube O-ring with engine oil supplement.
Install the tube into the oil pan.

NOTE: Refer to FASTENER NOTICE in Cautions and Notices.

Install the indicator tube bracket to the intake manifold bolt.
Tighten: Tighten the bolt to 10 N.m (89 lb in).