LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Cobalt LTZ >> Repair and Diagnosis >> External Pages >> Different car >> Section 677 (Engine Mechanical - 2.0L (LSJ)) >> Repair Instructions >> Off-Vehicle Repair Instructions >> Camshaft Position Sensor Housing Removal

Camshaft Position Sensor Housing Removal

WARNING: This page is about a different car, the 2007 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Camshaft Position Sensor Housing
    GM1534962Courtesy of GENERAL MOTORS CORP.
  1. Remove the camshaft position sensor housing studs.
  2. Remove and discard the camshaft position sensor housing seal.