LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Cobalt LTZ >> Repair and Diagnosis >> External Pages >> Different car >> Section 669 (Rear Suspension System) >> Repair Instructions >> Wheel Stud Replacement (Disc Brake) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 Pontiac G5 Pursuit, 2007 Pontiac G5, and 2007 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Remove the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation (4 Lug Wheel) or Tire and Wheel Removal and Installation (5 Lug Wheel) .
  3. Remove the brake rotor. Refer to Rear Brake Rotor Replacement .
  4. Fig 1: Removing Wheel Stud From Hub Flange
    GM361843Courtesy of GENERAL MOTORS CORP.
  5. Using the J 43631  , remove and discard the wheel stud.