LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Cobalt LTZ >> Repair and Diagnosis >> External Pages >> Different car >> Section 661 (Wiper System & Washer System) >> Repair Instructions >> Washer Solvent Container Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 Pontiac G5 Pursuit, 2007 Pontiac G5, and 2007 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Washer Pump Hose, Washer Pump Electrical Connector, & Washer Solvent Level Sensor
    GM815208Courtesy of GENERAL MOTORS CORP.
  1. Remove the front fender liner. Refer to Front Fender Liner Replacement .
  2. Disconnect the washer pump hose from the pump.
  3. Drain the washer solvent from the washer solvent container and store in a suitable clean container.
  4. Disconnect the washer pump and level sensor switch electrical connectors.
    5. Fig 2: Locating Washer Solvent Container
    GM869670Courtesy of GENERAL MOTORS CORP.
  5. Remove the washer solvent container screws.
  6. Remove the washer solvent container from the right frame rail.
scientia non olet · About LEMON Manuals