LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Cobalt LTZ >> Repair and Diagnosis >> External Pages >> Different car >> Section 652 (Engine Mechanical - 2.2L (L61)) >> Repair Instructions >> On-Vehicle Repair Instructions >> Oil Pan Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 Pontiac G5 Pursuit, 2007 Pontiac G5, and 2007 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Fig 1: View Of Oil Pan Drain Bolt
    GM758466Courtesy of GENERAL MOTORS CORP.
  3. Drain the engine oil.
  4. Remove the engine drive belt. Refer to Drive Belt Replacement .
  5. Remove the lower AC compressor bolt.
  6. Fig 2: Identifying Oil Pan Bolts Removal & Tightening Sequence
    GM466580Courtesy of GENERAL MOTORS CORP.
  7. Remove the oil pan bolts.
  8. Fig 3: View Of Oil Pan
    GM479939Courtesy of GENERAL MOTORS CORP.
  9. Remove the oil pan.