LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Cobalt LTZ >> Repair and Diagnosis >> External Pages >> Different car >> Section 652 (Engine Mechanical - 2.2L (L61)) >> Repair Instructions >> On-Vehicle Repair Instructions >> Intake Manifold Cover Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 Pontiac G5 Pursuit, 2007 Pontiac G5, and 2007 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View of intake manifold cover
    GM1752244Courtesy of GENERAL MOTORS CORP.
  1. Remove the engine oil fill cap.
  2. Grasp the intake manifold cover by the lower right inboard corner and pull up to disengage the cover from the stud.
  3. Grasp the intake manifold cover by the upper left corner and pull up to disengage the cover from the stud.
  4. Remove the intake manifold cover.
scientia non olet · About LEMON Manuals