LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Cobalt LTZ >> Repair and Diagnosis >> External Pages >> Different car >> Section 652 (Engine Mechanical - 2.2L (L61)) >> Repair Instructions >> On-Vehicle Repair Instructions >> Drive Belt Tensioner Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 Pontiac G5 Pursuit, 2007 Pontiac G5, and 2007 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the drive belt. Refer to Drive Belt Replacement .
    2. Fig 1: View Of Drive Belt Tensioner
    GM758258Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: To remove the tensioner bolt, an access hole has been provided through the inner and outer engine rail.
  2. Remove the drive belt tensioner bolt.
  3. Remove the drive belt tensioner.
scientia non olet · About LEMON Manuals