LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Cobalt LTZ >> Repair and Diagnosis >> External Pages >> Different car >> Section 652 (Engine Mechanical - 2.2L (L61)) >> Repair Instructions >> On-Vehicle Repair Instructions >> Crankshaft Rear Oil Seal Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 Pontiac G5 Pursuit, 2007 Pontiac G5, and 2007 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the transmission. Refer to Transmission Replacement for the M86/N94 Getrag transmission or Transmission Replacement for the 4T40-E/4T45-E transmission.
  2. Remove the flywheel.
    3. Fig 1: View Of Crankshaft Rear Oil Seal
    GM406046Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: Make sure not to damage the outside diameter of the crankshaft or chamber with any tool.
  3. Pry the crankshaft rear oil seal with a flat-bladed tool.
scientia non olet · About LEMON Manuals