LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Cobalt LTZ >> Repair and Diagnosis >> External Pages >> Different car >> Section 652 (Engine Mechanical - 2.2L (L61)) >> Repair Instructions >> On-Vehicle Repair Instructions >> Crankshaft Balancer Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 Pontiac G5 Pursuit, 2007 Pontiac G5, and 2007 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the engine drive belt. Refer to Drive Belt Replacement .
    2. Fig 1: View Of Harmonic Balancer Holder J38122-A
    GM467429Courtesy of GENERAL MOTORS CORP.
  2. Use J 38122-A  to prevent the crankshaft from rotating while loosening the crankshaft balancer bolt.
  3. Remove the crankshaft balancer bolt. Discard the bolt.
    4. Fig 2: View Of Crankshaft Balancer
    GM412138Courtesy of GENERAL MOTORS CORP.
  4. Remove the crankshaft balancer.
scientia non olet · About LEMON Manuals