LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Cobalt LTZ >> Repair and Diagnosis >> External Pages >> Different car >> Section 646 (Bolted Exterior Body Panels And Closures) >> Repair Instructions >> Seal Replacement - Plenum to Hood >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2007 Pontiac G5 Pursuit, 2007 Pontiac G5, and 2007 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Hood Rear Seal
    GM872488Courtesy of GENERAL MOTORS CORP.
  1. Position the hood rear seal to the vehicle.
  2. Push the hood rear seal onto the air inlet screen in order to fully seat the seal.