LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Cobalt LTZ >> Repair and Diagnosis >> External Pages >> Different car >> Section 646 (Bolted Exterior Body Panels And Closures) >> Repair Instructions >> Hood Insulator Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 Pontiac G5 Pursuit, 2007 Pontiac G5, and 2007 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise the hood.
  2. Fig 1: Hood Insulator Push-In Retainers
    GM1549904Courtesy of GENERAL MOTORS CORP.
  3. Remove the hood insulator push-in retainers (1) from the hood using the J 38778  .
  4. Slide the hood insulator rearward. Remove the hood insulator (2).