LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Cobalt LTZ >> Repair and Diagnosis >> External Pages >> Different car >> Section 641 (Heating, Ventilation, And Air Conditioning) >> Repair Instructions >> Heater Inlet Hose Replacement (RPOs L61, LE5) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 Pontiac G5 Pursuit, 2007 Pontiac G5, and 2007 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Surge Tank Cap
    GM873722Courtesy of GENERAL MOTORS CORP.
  1. Remove the surge tank cap.
  2. Slide a drain pan under the front of the dash under the heater inlet hose.
  3. Remove the dash panel exterior sound barrier.
  4. Fig 2: View Of Heater Inlet Hose Clamp At Heater Core
    GM872572Courtesy of GENERAL MOTORS CORP.
  5. Reposition the heater inlet hose clamp at the heater core using J 38185  .
  6. Remove the heater inlet hose from the heater core.
  7. Fig 3: Identifying Heater Inlet Hose
    GM872574Courtesy of GENERAL MOTORS CORP.
  8. Reposition the heater inlet hose clamp at the engine using J 38185  .
  9. Remove the heater inlet hose from the engine.