LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Cobalt LTZ >> Repair and Diagnosis >> External Pages >> Different car >> Section 641 (Heating, Ventilation, And Air Conditioning) >> Repair Instructions >> Heater Inlet Hose Replacement (RPO LSJ) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2007 Pontiac G5 Pursuit, 2007 Pontiac G5, and 2007 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Heater Inlet Hose Clamp At Heater Core
    GM872572Courtesy of GENERAL MOTORS CORP.
  1. Install the heater inlet hose to the heater core.
  2. Reposition the hose clamp to secure the hose using J 38185  .
    3. Fig 2: View Of Heater Inlet Hose At Engine
    GM1609040Courtesy of GENERAL MOTORS CORP.
  3. Install the heater inlet hose (1) to the engine.
  4. Reposition the hose clamp to secure the hose using J 38185  .
  5. Fill the cooling system. Refer to Draining and Filling Cooling System (2.0L (LSJ)) or Draining and Filling Cooling System (2.2L (L61), 2.4L (LE5)) or Draining and Filling Cooling System (GE 47716 Fill) .
  6. Remove the drain pan from under the vehicle.
scientia non olet · About LEMON Manuals