LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Cobalt LTZ >> Repair and Diagnosis >> External Pages >> Different car >> Section 641 (Heating, Ventilation, And Air Conditioning) >> Repair Instructions >> Flushing >> Reverse Flushing Setup

Reverse Flushing Setup

WARNING: This page is about a different car, the 2007 Pontiac G5 Pursuit, 2007 Pontiac G5, and 2007 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.
    IMPORTANT: Reverse flow refrigerant flush is recommended for desiccant bag failure. Replace the condenser/receiver dehydrator assembly when the A/C flush is complete and perform the following procedure:
    Fig 1: Using J45268-9, J45268-8, J 45268-7, & J 45268-2
    GM1211671Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: Inspect and lubricate the J 45268  sealing washers. See Special Tools . Refer to Sealing Washer Replacement .
  1. Install both J 45268-9 (2) onto the J 45268-10 (3).
  2. Install the J 45268-8 (1) onto the suction side of the J 45268-10 (3).
  3. Install the J 45268-7 (4) onto the discharge side of the J 45268-10 (3).
scientia non olet · About LEMON Manuals