Instrument Cluster Replacement
WARNING: This page is about a different car, the 2007 Pontiac G5 Pursuit, 2007 Pontiac G5, and 2007 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.
Instrument Cluster Replacement
| Callout | Component Name |
|---|---|
| Preliminary Procedures: Remove the instrument panel cluster (IPC) trim. Refer to Instrument Panel Cluster Trim Plate Bezel Replacement . |
|
| 1 | Cluster Assembly Screw
NOTE:
Refer to Fastener Notice
.
Tighten: 2 N.m (18 lb in) |
| 2 | Instrument Panel Cluster Assembly Tip: Disconnect the electrical connector. Refer to Control Module References for programming and setup information. |