Circuit/System Description
WARNING: This page is about a different car, the 2007 Pontiac G5 Pursuit, 2007 Pontiac G5, and 2007 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.
The body control module (BCM) calculates the mileage based on the vehicle speed signal circuit from the engine control module (ECM). The BCM then sends a serial data message to the instrument panel cluster (IPC) indicating the value of the odometer. The odometer will display 'error' if an internal BCM memory failure is detected. The odometer displays either miles or kilometers and the desired units can be accessed by pressing the trip/reset switch.