Rear Bumper Impact Bar Replacement
WARNING: This page is about a different car, the 2007 Pontiac G5 Pursuit, 2007 Pontiac G5, and 2007 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.
Rear Bumper Impact Bar Replacement
| Callout | Component Name |
|---|---|
| Preliminary Procedure: Remove the rear bumper energy absorber. Refer to Rear Energy Absorber Replacement . |
|
| 1 | Rear Bumper Impact Bar Bolts (Qty: 8)
NOTE:
Refer to Fastener Notice
.
Tighten: 25 N.m (18 lb ft) |
| 2 | Rear Bumper Impact Bar |