Seat Cushion Frame Replacement - Front

Fig 1: Identifying Front Seat Cushion Frame

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
NOTE: Refer to Fastener Notice . Fastener Tightening Specifications: Refer to Fastener Tightening Specifications . Preliminary Procedures Remove the front seat. Refer to Seat Replacement - Front Bucket . Remove the seat cushion inner trim cover. Refer to Seat Cushion Inner Trim Panel Replacement . Remove the seat cushion outer trim cover. Refer to Seat Cushion Outer Trim Panel Replacement - Front Seat . Remove the front seat cushion cover and pad. Refer to Seat Cushion Cover and Pad Replacement - Front . Re-zero the inflatable restraint passenger presence system whenever the seat cushion or any component of the passenger presence system is removed. Refer to Passenger Presence System Programming and Setup .
1	Screw, Seat Cushion Assembly (Qty: 4) Tighten: 25 N.m (18 lb ft)
2	Frame Assembly, Seat Cushion Tip: Remove the lumbar adjuster screws. Disconnect the cushion heater electrical connector.

Callout

Component Name

NOTE: Refer to Fastener Notice .

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

Preliminary Procedures

Remove the front seat. Refer to Seat Replacement - Front Bucket .
Remove the seat cushion inner trim cover. Refer to Seat Cushion Inner Trim Panel Replacement .
Remove the seat cushion outer trim cover. Refer to Seat Cushion Outer Trim Panel Replacement - Front Seat .
Remove the front seat cushion cover and pad. Refer to Seat Cushion Cover and Pad Replacement - Front .
Re-zero the inflatable restraint passenger presence system whenever the seat cushion or any component of the passenger presence system is removed. Refer to Passenger Presence System Programming and Setup .

Screw, Seat Cushion Assembly (Qty: 4)

Tighten: 25 N.m (18 lb ft)

Frame Assembly, Seat Cushion
Tip: