LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2005 >> Venture LT >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel System Displays, Gauges And Console >> Repair Instructions >> Instrument Panel Cluster (IPC) Replacement >> Removal Procedure

Removal Procedure

    IMPORTANT: The ignition switch must be in the OFF position when removing the instrument panel cluster.
  1. Remove the IP cluster trim plate. Refer to Trim Panel Replacement - Instrument Panel (I/P) Cluster .
    2. Fig 1: View Of Instrument Panel Cluster
    GM318190Courtesy of GENERAL MOTORS CORP.
  2. Remove the screws from the IP cluster to instrument panel.
    3. Fig 2: Locating Electrical Connectors
    GM318187Courtesy of GENERAL MOTORS CORP.
  3. Remove the IP cluster from the instrument panel.
  4. Disconnect the electrical connectors.
scientia non olet · About LEMON Manuals