LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2005 >> Silverado 1500 HD, RWD >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Mechanical - 4.8L, 5.3L & 6.0L (Repair Instructions - 1 Of 3) >> Repair Instructions (On-Vehicle And Off-Vehicle - Part 1) >> On-Vehicle Repair Instructions >> Oil Pan Cover Replacement >> Installation Procedure

Installation Procedure

    Fig 1: View Of Oil Pan Cover, Gasket & Bolts
    GM260125Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  1. Install a new oil pan cover gasket (3), the cover (2) and bolts (1).

    Tighten:  Tighten the bolts to 12 N.m (106 lb in).

  2. Refill the engine oil. Refer to Capacities - Approximate Fluid and/or Fluid and Lubricant Recommendations in Maintenance and Lubrication.
scientia non olet · About LEMON Manuals