Transmission Overheats

Checks	Cause
TCC Circuit	Blockage during apply or release
TCC Valve Spring (224)	The spring is broken.
Pump Cover (206)	Cross channel leakage
Pressure Regulator Valve (231)	The valve is stuck in a high demand position.
Oil Cooler	The cooler or the cooler lines are blocked.
Gasket (6)	The gasket is damaged.
Retainer Pin (211)	The pin is broken.
Turbine Shaft O-ring (2)	The O-ring is damaged.
Turbine Shaft Seals (503)	The seals are damaged.
Stator Shaft Bushing (233)	The bushing is worn or damaged.
Oil Transfer Hole Cup Plug	The plug is leaking.
Fluid	The fluid level is low.
Radiator	Air flow is restricted.