LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2005 >> Silverado 1500 HD, 4WD >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission - 4L80-E/4L85-E - Service, Diagnosis & Trouble Shooting >> Troubleshooting >> Automatic Transmission Oil Cooler Flushing and Flow Test (J 45096) >> Code Recording Procedure

Code Recording Procedure

    Fig 1: Setting Main Function Switch To CODE Position
    GM1212346Courtesy of GENERAL MOTORS CORP.
  1. Turn the main function switch to the CODE position.
    2. IMPORTANT:
    • If power is interrupted prior to the recording of the seven-character code, the code will be lost and the flow rate test will need to be repeated.
    • The flow test must run for a minimum of 8-10 seconds and be above 0.5 gpm for a code to be generated.
  2. Record TESTED flow rate, temperature, cycle and seven-character flow code information on repair order.
scientia non olet · About LEMON Manuals