Installation Procedure

Fig 1: Identifying Brake Pedal Brace Nuts

Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the brace with nuts.
Tighten: Tighten the brace with nuts to 22 N.m (16 lb ft) .
Install the brake pedal.

Fig 2: View Of Dash With Instrument Panel Removed

Courtesy of GENERAL MOTORS CORP.

Install the I/P. Refer to Instrument Panel (I/P) Assembly Replacement in Instrument Panel, Gages, and Console.