LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2005 >> Optra5 LS, Standard >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Interior/Exterior Trim >> Instrument Panel, Gages, And Console >> Repair Instructions >> Trim Panel Replacement - Instrument Panel (I/P) Center (Four Door) >> Removal Procedure

Removal Procedure

    Fig 1: View Of Center Molding
    GM1508816Courtesy of GENERAL MOTORS CORP.
  1. Disconnect the mode control cable from the mode door.
  2. Remove the center molding.
  3. Disconnect the electrical connector.
scientia non olet · About LEMON Manuals