Low Fuel Indicator Inoperative
| Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
| 1 | Did you perform the Diagnostic System Check-Instrument Panel? | - | Go to Step 2 | Diagnostic System Check - Instrument Cluster |
| 2 | With a fused jumper wire, Connect terminals 4 and 5 of the fuel pump connector together. Did the Low Fuel Indicator turn on? |
- | Go to Step 7 | Go to Step 3 |
| 3 | Using a multimeter test terminal 4 of the fuel pump connector for continuity to ground. Refer to Testing for Continuity Is ground present? |
- | Go to Step 4 | Go to Step 5 |
| 4 | Using a multimeter test for continuity between terminal 5 of the fuel pump connector and terminal B14 of the Instrument cluster. Refer to Testing for Continuity Is continuity present? |
- | Go to Step 8 | Go to Step 6 |
| 5 | Repair the open in ground circuit between terminal 4 of the fuel pump and ground 302. Refer to Wiring Repairs Did you find and complete the repair? |
- | Go to Step 9 | - |
| 6 | Repair the open in signal circuit between terminal 5 of the fuel pump connector and terminal B14 of the Instrument cluster. Refer to Wiring Repairs Did you find and complete the repair? |
- | Go to Step 9 | - |
| 7 | Replace the Fuel Pump assembly. Refer to 1.4L Fuel Pump Replacement
, 1.6L Fuel Pump Replacement
, 1.8L Fuel Pump Replacement
, 2.0L Fuel Pump Replacement Did you complete the repair? |
- | Go to Step 9 | - |
| 8 | Replace the Instrument Cluster Assembly. Refer to Instrument Panel Cluster (IPC) Replacement Did you complete the repair? |
- | Go to Step 9 | - |
| 9 | Operate the system in order to verify the repair. Did you find and complete the repair? |
- | System OK | Go to Step 2 |