Removal Procedure
- Disconnect the negative battery cable.
- Remove the headlamp mounting bolts.
- Remove the headlamp mounting nut.
- Disconnect the turn signal electrical connector.
- Remove the turn signal bulb, if necessary.
- Disconnect the headlamp electrical connector.
- Remove the headlamp assembly.
- Turn left and remove the headlamp bulb cap, if necessary.
- Dry off the headlamp bulb clip.
- Disconnect the headlamp bulb connector.
- Remove the headlamp bulb, if necessary.
CAUTION:
Refer to Battery Disconnect Caution
in Cautions and Notices.