Poor Fuel Fill Quality
WARNING: This page is about a different variant/trim than selected.
Poor Fuel Fill Quality
| Problem |
Causes |
| Definition: During the fueling process a continual, occasional or no fuel nozzle shut-off condition has occurred. |
| Difficult to fill |
- Fill limiter vent valve stuck closed
- evaporative emission (EVAP) canister restricted
- EVAP vent valve stuck closed
- Restricted vapor lines
- High reid vapor pressure or high fuel temperature
- Fuel filler hose is pinched or kinked
- Ignition switch ON (Vent Valve Closed)
|
| Over fill |
- Pressure relief valve is stuck open or leaking
- Fill limiter vent valve stuck open or leaking
|
| Pre-mature shut-off of the fuel dispensing nozzle |
- Fill limiter vent valve stuck closed
- EVAP canister restricted
- EVAP vent valve stuck closed
- Restricted vapor lines
- High reid vapor pressure or high fuel temperature
- Ignition switch ON (EVAP vent valve closed)
|
| Fuel Spitback |
- Restricted EVAP canister
- High reid vapor pressure or high fuel temperature
- Ignition switch ON (EVAP vent valve closed)
|