LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2005 >> Malibu Maxx >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Engine Mechanical - 2.2L (L61)) >> Repair Instructions >> On-Vehicle Repair Instructions >> Engine Front Cover Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Remove the crankcase balancer. Refer to Crankshaft Balancer Replacement .
    2. Fig 1: View Of Drive Belt Tensioner
    GM412154Courtesy of GENERAL MOTORS CORP.
  2. Remove the drive belt tensioner.
    3. Fig 2: View Of Engine Front Cover
    GM412537Courtesy of GENERAL MOTORS CORP.
  3. Remove the engine front cover to water pump bolt.
    4. Fig 3: View Of Engine Front Cover Bolts
    GM412538Courtesy of GENERAL MOTORS CORP.
  4. Remove the remaining engine front cover bolts.
  5. Remove the engine front cover.
    • If the engine front cover gasket is damaged.
    • Remove the front engine mount. Refer to Engine Mount Replacement  .
    • Remove the engine front cover gasket if it is damaged.
scientia non olet · About LEMON Manuals