LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2005 >> Malibu Maxx >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Engine Mechanical - 2.2L (L61)) >> Repair Instructions >> On-Vehicle Repair Instructions >> Drive Belt Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Remove the front fender liner. Refer to Front Fender Liner Replacement .
    2. Fig 1: View Of Drive Belt Tensioner And Special Tool
    GM854300Courtesy of GENERAL MOTORS CORP.
  2. Use the J 44811 in order to rotate the drive belt tensioner counter-clockwise to release the spring tension.
  3. Remove the drive belt.
scientia non olet · About LEMON Manuals