LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2005 >> Malibu Maxx >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Engine Mechanical - 2.2L (L61)) >> Repair Instructions >> On-Vehicle Repair Instructions >> Camshaft Cover Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Remove the air cleaner outlet resonator. Refer to Air Cleaner Outlet Resonator Replacement in Engine Controls -2.2L (L61).
  2. Remove the PCV hose.
  3. Remove the fuel line bracket.
  4. Fig 1: View Of Ignition Coil & Module Assembly
    GM412144Courtesy of GENERAL MOTORS CORP.
  5. Remove the ignition coil and module assembly. Refer to Ignition Coil Housing Replacement in Engine Controls -2.2L (L61).
  6. Fig 2: View Of Camshaft Cover Ground Strap
    GM412139Courtesy of GENERAL MOTORS CORP.
  7. Remove the ground strap retaining stud from the camshaft cover and disconnect the ground strap.
  8. Fig 3: View Of Camshaft Cover
    GM412147Courtesy of GENERAL MOTORS CORP.
  9. Remove the camshaft cover bolts.
  10. Remove the camshaft cover.