LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2005 >> Malibu Maxx >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Engine Mechanical - 2.2L (L61)) >> Repair Instructions >> Off-Vehicle Repair Instructions >> Oil Level Indicator and Tube Removal

Oil Level Indicator and Tube Removal

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Removing & Installing Oil Level Indicator & Tube
    GM1052064Courtesy of GENERAL MOTORS CORP.
  1. Remove knock sensor connector from the oil level indicator tube.
  2. Remove the tube bracket to the intake manifold bolt.
  3. Remove the tube from the oil pan.
scientia non olet · About LEMON Manuals