LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2005 >> Malibu Maxx >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel System Displays, Gauges And Console >> Repair Instructions >> Cup Holder Replacement - Front Floor Console - Rear >> Installation Procedure

Installation Procedure

    Fig 1: View Of Console Rear Cup Holder
    GM1208000Courtesy of GENERAL MOTORS CORP.
  1. Engage the cupholder to the hooks at the top of the floor console and install the cupholder.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the console rear cup holder screws.

    Tighten:  Tighten the screws to 1 N.m (10 lb in).

  3. Install the console armrest. Refer to Console Armrest Replacement - Front Floor .
scientia non olet · About LEMON Manuals