LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2005 >> Malibu Maxx >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel System Displays, Gauges And Console >> Repair Instructions >> Bracket Replacement - Instrument Panel (I/P) Center Support >> Installation Procedure

Installation Procedure

    Fig 1: View Of Instrument Panel (I/P) Center Support Bracket Bolts
    GM1206841Courtesy of GENERAL MOTORS CORP.
  1. Install the I/P center support bracket.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the I/P center support bracket bolts.

    Tighten:  Tighten the bolts to 10 N.m (89 lb in).

  3. Install the body control module. Refer to Body Control Module Replacement .
  4. Install the center console. Refer to Console Replacement .
scientia non olet · About LEMON Manuals