Transmission Brace Replacement (Trans Extension Housing to Engine)

WARNING: This page is about a different car, the 2008 Buick Lucerne. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Transaxle Extension Housing Brace

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
NOTE: Refer to Fastener Notice . Fastener Tightening Specifications: Refer to Fastener Tightening Specifications . Preliminary Procedures Raise the vehicle. Refer to Lifting and Jacking the Vehicle . Remove the right front tire and wheel. Refer to Tire and Wheel Removal and Installation . Remove the right front wheelhouse liner. Refer to Front Wheelhouse Liner Replacement .
1	Transaxle Brace Bolt (Qty: 2) Tip: Install all bolts by hand first before tightening any bolts. Tighten: 50 N.m (37 lb ft)
2	Transaxle Brace Bolt (Qty: 2) Tip: Install all bolts by hand first before tightening any bolts. Tighten: 50 N.m (37 lb ft)
3	Transaxle Brace