Floor Shift Control Knob Replacement

WARNING: This page is about a different car, the 2008 Buick Lucerne. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Floor Shift Control Knob

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
1	Shift Control Knob Tip: Set the parking brake. With the engine OFF, shift the transmission into Neutral. Do NOT twist or turn the knob during removal or installation, as it will break the spring. To remove, firmly pull knob up off shift control lever. To install, firmly push knob down onto shift control lever.