Inside Rearview Mirror Replacement

WARNING: This page is about a different car, the 2008 Buick Lucerne. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Inside Rearview Mirror Components

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
1	Rearview Mirror Support Cover Procedure Use a flat bladed tool, slide the mirror retaining cover (1) off the mirror. The mirror retaining cover (1) clip on and off.
2	Rearview Mirror Procedure: With both hands on the mirror, rock it from side to side while sliding downward, this will assist in the releasing of the mirror from the mounting tab.

Callout

Component Name

Rearview Mirror Support Cover

Procedure

Use a flat bladed tool, slide the mirror retaining cover (1) off the mirror.
The mirror retaining cover (1) clip on and off.

Rearview Mirror
Procedure:
With both hands on the mirror, rock it from side to side while sliding downward, this will assist in the releasing of the mirror from the mounting tab.