Instrument Panel Center Trim Panel Replacement

WARNING: This page is about a different car, the 2008 Buick Lucerne. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Locating Instrument Panel Center Trim Panel

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .
1	Instrument Panel Center Trim Plate Tip: Use a flat-bladed plastic trim tool to remove the center trim plate from the instrument panel assembly.
2	Retainer Clips (Qty: 6)