Body Hinge Pillar Trim Panel Replacement

WARNING: This page is about a different car, the 2008 Buick Lucerne. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Body Hinge Pillar Trim Panel

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Fastener Tightening Specifications: Refer to Fastener Tightening Specifications . Preliminary Procedures: Remove the front door sill trim plate. Refer to Front Carpet Retainer Replacement .
1	Panel, Hinge Pillar Trim Tip: Pull rearward to disengage the retaining clips and slide out past the hood latch release handle.