Instrument Panel Compartment Door Opening Frame Replacement

WARNING: This page is about a different car, the 2007 Saturn Sky. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Instrument Panel Compartment Door Opening Frame

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure: Remove the instrument panel compartment assembly. Refer to Instrument Panel Compartment Replacement .
1	Instrument Panel Compartment Frame Bolt Caps (Qty: 2)
2	Instrument Panel Compartment Frame Bolts (Qty: 5) NOTE: Refer to Fastener Notice . Tighten: 2.5 N.m (22 lb in)
2	Instrument Panel Compartment Frame Screws (Qty: 2) Tighten: 2.5 N.m (22 lb in)
3	Instrument Panel Compartment Frame Assembly Procedures Disconnect the electrical connections. When replacing the compartment frame assembly, transfer all necessary components.