Radiator Hose Replacement - Inlet (3.6L)
WARNING: This page is about a different car, the 2006 Buick LaCrosse and 2006 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
Radiator Hose Replacement - Inlet (3.6L)
| Callout | Component Name |
|---|---|
| Fastener Tightening Specifications:
Refer to Fastener Tightening Specifications
. Preliminary Procedure: Drain the cooling system. Refer to Draining and Filling Cooling System (L26 Static Fill) , Draining and Filling Cooling System (LY7 Static Fill) or Draining and Filling Cooling System (L26, LY7, GE 47716 Fill) . |
|
| 1 | Hose, Coolant Recovery Tip: Use J 38185 Hose Clamp Pliers, to release the clamp on the radiator inlet hose. See Special Tools . |
| 2 | Cap, Radiator |
| 3 | Hose, Radiator Inlet Tip: Use J 38185 Hose Clamp Pliers, to release the clamp on the radiator inlet hose. See Special Tools . |