Repair Tool Description
WARNING: This page is about a different car, the 2005 Buick LaCrosse and 2005 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
The cylinder head bolt hole thread repair tooling are in the kits J 42385-2000 and J 42385-700 . The cylinder head bolt hole thread repair components consist of the following:
- Drill (1) J 42385-723
- Tap (2) J 42385-724
- Installation driver (3) J 42385-725
- Alignment pin (4) J 42385-303
- Bushing (5) J 42385-302
- Bolts (6) J 42385-733
- Fixture plate (7) J 42385-401