LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2005 >> Impala Police >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel System Displays, Gauges And Console >> Repair Instructions >> Compartment Replacement - Instrument Panel (I/P) >> Installation Procedure

Installation Procedure

  1. Align the I/P compartment to the opening.

    Depress the side stops located on the sides of the I/P compartment.

    Install the I/P compartment to the I/P compartment opening.

    2. Fig 1: Removing/Installing I/P Compartment Screws
    GM519555Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the I/P compartment screws.

    Tighten:  Tighten the screws to 2 N.m (18 lb in).

  3. Close the I/P compartment. Verify that the I/P compartment is properly aligned. Adjust the compartment as required.
  4. Install the right insulator panel. Refer to Closeout/Insulator Panel Replacement - Right .
scientia non olet · About LEMON Manuals