Chime Inoperative
Chime Inoperative
| Step | Action | Yes | No |
|---|---|---|---|
| Schematic Reference: Audible Warnings Schematics | |||
| 1 | Did you perform the Diagnostic System Check - Vehicle? | Go to Step 2 | Go to Diagnostic System Check - Vehicle in Vehicle DTC Information |
| 2 |
|
Go to Seat Belt Indicator Circuit Malfunction in Seat Belts | Go to Step 3 |
| 3 | Turn the headlamps ON. Are the headlamps ON? |
Go to Step 4 | Go to Interior Lighting Systems Description and Operation in Lighting Systems |
| 4 | Open the driver door. Does the driver information center (DIC) display DOOR AJAR? |
Go to Step 5 | Go to Door Ajar Indicator Description and Operation in Doors |
| 5 | Replace the body control module (BCM). Refer to Control Module References
in Computer/Integrating Systems for replacement, setup, and programming. Did you complete the replacement? |
Go to Step 6 | - |
| 6 | Replace the instrument panel cluster (IPC). Refer to Control Module References
in Computer/Integrating Systems for replacement, setup, and programming. Did you complete the replacement? |
Go to Step 7 | - |
| 7 | Operate the system in order to verify the repair. Did you correct the condition? |
System OK | Go to Step 2 |