Receiver Replacement - Digital Radio

Fig 1: Receiver Replacement - Digital Radio

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
NOTE: Refer to Fastener Notice in Cautions and Notices. Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .Preliminary Procedures: Remove the rear shelf trim panel. Refer to Trim Panel Replacement - Rear Window Shelf .
1	Receiver Assembly, Digital Radio Tip: Disconnect the electrical connectors. Perform the digital radio receiver set up procedure. Refer to Digital Radio Receiver Setup .
2	Screw, Digital Radio Receiver Tighten: 9 N.m (80 lb in)